I'm currently using a WRT54G router with Tomato firmware and I have a simple residential dynamic ip address cable modem. The cable modem is in "bridged" mode and the router is set to use DHCP to get ...

Your Linksys router uses a dynamic external IP address leased from your ISP. This dynamic address changes based on the time limits of the lease. If your ISP permits, you can prevent the external IP ...

When you set up multiple routers on a network, designate the router that connects to the Internet as the gateway and the other routers as routers. Configure the gateway with a WAN and LAN address, ...

Editors’ note: This article was first published on March 26, 2013 and updated on July 1, 2016 with up-to-date information. It might seem like a daunting task to set up a new home router. But it ...

To access your router configuration page or want to know the Login URL for your router to change settings, you will have first to find the IP address of your router, then open your router ...

This is a user generated content for MyStory, a YourStory initiative to enable its community to contribute and have their voices heard. The views and writings here ...

The Simple Network Management Protocol (SNMP) is a necessary tool for every network administrator. You can easily configure it with just a few commands. SNMP is still the most popular way to monitor ...

In an upcoming blog I expect to write about configuring a home router, which requires logging on to it. This, in turn, requires knowing the IP address of the router. Non-techies typically don’t know ...

The Totolink A2004NS AC1200 Wireless Dual Band Gigabit Router has decent Wi-Fi performance, a practical design, and an affordable price. Its Web interface is not intuitive enough for home users, and ...

I am doing a review of the configuration of all our Cisco equipment after taking over from my predecessor. I noticed in one of the routers has a loopback interface on it but I can’t account for the ...