Suppose that you need to test a 1.5V, AA-size alkaline battery. You can apply a short circuit and measure current, or you can measure open-circuit voltage, but neither method properly tests the ...
This application note shows how to use linear voltage regulators to provide a constant current. Two circuits are presented, one for high-side and another for low-side current sources. The MAX1818 and ...
The LT3954, a DC/DC converter designed to operate as a constant-current source and constant-voltage regulator with an internal 5A switch, is now available from Linear Technology. The LT3954, a DC/DC ...
Download this article in PDF format. High-brightness visible-light LEDs (VLEDs) require a constant-current source. This simple, RFI-free circuit takes advantage of the normally-on properties of the ...
Controlling LEDs is really quite simple. As you know, they need to be current limited which is as easy as applying Ohm’s law to your given set of values. To make things even more even there’s a slew ...
An idea in an earlier blog is to make a pwm interface that can accept 5, 12 and 24V pulse streams. That one uses a bunch of resistors and has three separate inputs. Below that, wise commenter DB ...
The LM334 is not only an adjustable current source, but it is also a rectifier. Right on the front page of the TI data sheet are the words: “Reverse applied voltages of up to 20V will draw only a few ...
Controlling LEDs is really quite simple. As you know, they need to be current limited which is as easy as applying Ohm’s law to your given set of values. To make things even more even there’s a slew ...
Some results have been hidden because they may be inaccessible to you
Show inaccessible results
Feedback